Assisted hatching micropipettes are used to direct acidic solution (acidified Tyrodes) onto the zona pellucida to thin the zona or create a hole to enable the embryo to hatch.
Zona dissection micropipettes are used to mechanically cut an opening in the zona pellucida of an oocyte or embryo to enable assisted hatching and biopsy.
Micromanipulation pipettes for a variety of other uses in research are also available from our extensive range. Please contact your local representative for more information.
| Reference | Pipette Type | Finish Style | Tip Angle | Internal Diameter (microns) | Outer Diameter (microns) | Distance tip to bend (mm) |
|---|---|---|---|---|---|---|
| MAH-SM-0 | Straight Hatching | – | 0 | 8-10µm | – | 0.5mm |
| MAH-SM-20 | Hatching | – | 20 | 8-10µm | – | 0.5mm |
| MAH-SM-25 | Hatching | – | 25 | 8-10µm | – | 0.5mm |
| MAH-SM-30 | Hatching | – | 30 | 8-10µm | – | 0.5mm |
| MAH-SM-35 | Hatching | – | 35 | 8-10µm | – | 0.5mm |
| Reference | Pipette Type | Finish Style | Tip Angle | Internal Diameter (microns) | Outer Diameter (microns) | Distance tip to bend (mm) |
|---|---|---|---|---|---|---|
| MAH-LG-20 | 20º angled Hatching | – | 20 | 10-12µm | – | 0.5mm |
| MAH-LG-30 | 30º angled Hatching | – | 30 | 10-12µm | – | 0.5mm |
| MAH-LG-35 | 35º angled Hatching | – | 35 | 10-12µm | – | 0.5mm |
| MAH-LG-45 | 45º angled Hatching | – | 45 | 10-12µm | – | 0.5mm |
| Reference | Pipette Type | Finish Style | Tip Angle | Internal Diameter (microns) | Outer Diameter (microns) | Distance tip to bend (mm) |
|---|---|---|---|---|---|---|
| LDS | Zona Drilling | – | 30 | 9 µm | – | 1mm |
| Reference | Pipette Type | Finish Style | Tip Angle | Internal Diameter (microns) | Outer Diameter (microns) | Distance tip to bend (mm) |
|---|---|---|---|---|---|---|
| PZD-0 | Straight PZD Micropipet | – | 0 | – | – | 0.5mm |
| PZD-20 | PZD Micropipet | – | 20 | – | – | 0.5mm |
| PZD-30 | PZD Micropipet | – | 30 | – | – | 0.5mm |
| PZD-35 | PZD Micropipet | – | 35 | – | – | 0.5mm |
| Reference | Pipette Type | Finish Style | Tip Angle | Internal Diameter (microns) | Outer Diameter (microns) | Distance tip to bend (mm) |
|---|---|---|---|---|---|---|
| LCS | Zona Cutting | – | 30 | – | – | 1mm |
Our Vision: Improvement of pregnancy rate and better services to both professionals and patients, As we grow, other specialized lines will be added, according markets demand, We shall be looking forward to service you and our collaboration.
